Specifications(Download)BACK

DF24 - Drill & Fill® Aerator Head Specifications
Tooling:
24 carbide tipped drill bits spaced on 7.5” centers
22.5” x 60” pattern
Drill Depth:
1” to 12”
Drill Bit Sizes:
Standard 15/16” diameter and 8” depth
Special 3/4” diameter and 12” depth
With either of the standard drill bits, 0.21 cubic yards of fill material is required per 1,000 square feet of drilled area.
Aerification Speed:
Up to 3,500 square feet per hour at 8” deep
Drill Bit Rotation:
300 at 3,000 engine rpm
Hopper Capacity:
0.21 cubic yards per fill

    Copyright © 2007   Drill & Fill Mfg., 5484 S. Old Carriage Road, Rocky Mount, NC, 27803    [Contact Us]